Welcome to Warm Floor Comfort!

Thermostats

Mechanical Thermostats
Non-Programmable Thermostats
Programmable Thermostats

Thermostats are designed to control the operation of heating appliances, heating systems, hot water systems and other devices requiring temperature control.

LUX Programmable Thermostats

# The range of temperatures, which can operate such thermostats, determined by the type of sensor and usually is - 40 ° C ... +140 ° C, however, produced in series thermostats are a few more narrow standard ranges: thermostats with a temperature range from 0 ° C ... +30 ° C - is used in vegetable stores, greenhouses, hothouses, to operate the heaters at a temperature of air in the duct fan heaters, etc.

# Thermostats with a temperature range from +35 ° C ... +95 ° C - to maintain the temperature of water in the hot water or coolant temperature in heating systems. # Thermostats with a temperature range from +60 ° C ... +140 ° C - used in the management of the electric sauna, heat guns, etc. # Thermostats with a temperature range from +5 ° C ... +55 ° C - a universal range: warm floor, radiator, fan coil, etc. # We can manufacture thermostats with any range of temperatures (within the range of the sensor). Price does not depend on the range.

Thermostat ART-18-5K Thermostat ART-18TK Thermostat ART-18-5K Thermostat ART-18TK Thermostat Thermostat ART-19 ART-18SK Thermostat Thermostat ART-19 ART-18SK Thermostat ART-18-5H Thermostat ART-182-5K Thermostat ART-18-5H Thermostat ART-182-5K cost of the unit: 1120 USD | download passport: word (498,1 kb) Thermostat thermometer, temperature control, temperature control, temperature sensor, temperature sensor, thermostat thermostat thermometer, temperature control, temperature control, temperature sensor, temperature sensor, thermostat

Thermostat with analog control

In the thermostat with an analog control as a temperature sensor, typically used with digital potentiometer scale. Temperature setting knob is located in the center of the scale. Such systems usually have a display CHAIN Include Heating on, sometimes indicated with an emergency condition sensor (cliff, closure). Most often they are used in simple heating systems, heating control simple technological processes, as emergency temperature sensors, etc. The sensor is supplied.

The temperature range in which such work can Thermostats, determined by the type of sensor and usually is - 40 ° C ... +140 ° C, however, commercially produced devices several more narrow standard ranges.

To protect pipes from freezing, we offer a thermostat with a fixed setpoint +5 ° C, which directly control the heating cable. In this case the sensor is installed close to the tube around the cable and the temperature on its surface never falls below the set point.

Thermostats used to control de-icing systems are configured so that the heaters are included in the temperature range from -5 ° C to +5 °. This setting allows you to effectively avoid the formation of icicles and ice accumulation and prevents unnecessary power consumption. Of course, at the request of the customer, can make a regulator with any operating range of the above mentioned limits.

Thermostat with analog control is currently produced on the basis of a standard module ART-18. They vary in power output (1,0 or 2,0 kW) and / or output signal (dry contact or voltage of 220 V), in addition, devices with a fixed setpoint can be supplied with a switch.

Ordering sample: ART-18-10VK 35-95 ° C
where: 10 - Tried load current (5 or 10 A)
B - the presence of the switch (fixed setting)
K - output signal: K - hops. contact, H - voltage 220 V
35-95 ° C - operating temperature range, or fix. setpoint.
In addition to housing for the Z-102 thermostats ART-18 used shell Z-28 (ART-18C). The most common such device has a working range of 5 - 55 ° C, max. load power 2,0 kW, voltage as the output signal used to control the "warm floor". Dimensions thermostats ART-18 (HxWxD) - 90h50h70 mm.

Thermostats ART-18SK and ART-18TK developed based on the thermostat ART-18, so their thermal and electrical characteristics are identical. Maximum load of these devices is 3 kW. However, structurally ART-18TK manufactured in standard single mounting box for concealed wiring, and ART-18SK open wiring. Shells of these devices have protection class IP44. The most common range of temperature control of these devices 0-40 C, but we can make them with any range of regulation (the price is not affected). In this device it on / off and temperature setting knob is made from digitized scale. On the device, except this pen, there are indicators for power and heating.
As with all our thermostats, ART-18SK and ART-18TK equipped with condition monitoring sensor. When breakage or closure of the relay is switched off and disconnects the heating. (Download a passport)

Dual regulator ART-182. Its characteristics are similar to the characteristics of other devices of the family of ART-18, but it has two channels of temperature control. In this case, the load is switched off if, though, would be in the same channel, will be reached set point temperature. Such devices are suitable for management by electric heating. In this case, one channel will operate the boiler, maintaining the temperature of air in the room, and the other will operate as a safety, preventing the boiling cauldron. That is why, in the pictures, the regulator only one channel is made easy for quick change of setting. However, other possible variants, including fixed installation in one or both channels. (Download a passport) Dimensions thermostats ART-182 (HxWxD) - 90h70h70 mm

ART-183 temperature controller with three temperature settings allows not only quick and convenient to regulate a comfortable temperature, but also significantly save energy and protect the building from freezing in winter.
When creating systems to protect from the formation of icicles, ice accumulation, etc., are widely used flexible tape heaters. Typically, management, use of simple thermostats, which include heating after lowering the temperature to a certain value. However, at low temperatures, ice and snow does not melt, so the icicles are formed. Thus, the inclusion of the heating tapes at low temperatures is impractical and results in an overrun of electricity and reduce resource tape. To control the de-icing systems created a specialized regulator ART-19. It includes loads only within a specified range of temperatures. For example, if you set the lower limit range -15 ° C, while the top - +5 ° C, then heating will be included only if the current temperature is within these limits, at a temperature below -15 ° C and +5 ° C heat will be turned off . Since, in different cases, the boundaries of this range may differ, the user can adjust their value, selecting, so the optimum operation of the system.

PEX Tubing, Taco Circulator Pumps, Takagi Tankless Water Heaters